Outside Machinist I
Epsilon Systems Mission Readiness Group is currently seeking a full-time Outside Machinist I in Portsmouth, VA.
Summary
Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.
Responsibilities
Reports to the Resource Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities.
Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
Strictly adheres to safety, quality standards.
Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
Insures all tools listed on the Required Tools List are available for use within two weeks of your employment.
Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.
Performs and/or verifies mechanical alignments.
Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
Assists in rigging when necessary.
Other duties as assigned.
Requirements
High School/GED /Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard.
Has knowledge of the trade qualifications and performs as an entry level Outside Machinist.
Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting) and blue print reading.
Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment. Will assist in rigging evolutions when necessary.
Communicates effectively
Works independently or in a group.
Ability to do basic math, i.e. add, subtract, divide and multiply.
Ability to read, write, speak, and comprehend English.
Ability to obtain and maintain National Security Clearance Level Secret.
Ability to obtain access to military and government installations worldwide.
Ability to travel.
Preferred Qualifications
Current security clearance
ADA Notations
Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery.
Epsilon Systems Solutions, Inc. and its subsidiaries are proud to be Equal Employment Opportunity and Affirmative Action employers, Minority/Female/Disabled/Veterans.
Are you a returning applicant?Previous Applicants:Email:Password:
If you do not remember your password click here.
. Apply now!Estimated Salary: $20 to $28 per hour based on qualifications.
Summary
Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.
Responsibilities
Reports to the Resource Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities.
Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
Strictly adheres to safety, quality standards.
Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
Insures all tools listed on the Required Tools List are available for use within two weeks of your employment.
Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.
Performs and/or verifies mechanical alignments.
Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
Assists in rigging when necessary.
Other duties as assigned.
Requirements
High School/GED /Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard.
Has knowledge of the trade qualifications and performs as an entry level Outside Machinist.
Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting) and blue print reading.
Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment. Will assist in rigging evolutions when necessary.
Communicates effectively
Works independently or in a group.
Ability to do basic math, i.e. add, subtract, divide and multiply.
Ability to read, write, speak, and comprehend English.
Ability to obtain and maintain National Security Clearance Level Secret.
Ability to obtain access to military and government installations worldwide.
Ability to travel.
Preferred Qualifications
Current security clearance
ADA Notations
Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery.
Epsilon Systems Solutions, Inc. and its subsidiaries are proud to be Equal Employment Opportunity and Affirmative Action employers, Minority/Female/Disabled/Veterans.
Are you a returning applicant?Previous Applicants:Email:Password:
If you do not remember your password click here.
. Apply now!Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
